Table of Contents
Advertisement
8.
Modify the destination by editing the fields of the Aggregate Destination Definition
dialog box that appears.
The dialog box includes some of the same fields you specified when creating the
destination. For more information on these fields, see
Destinations" on page
9.
Click OK.
Export Source Building Blocks
You can define export source building blocks for the following types of interface:
•
RIP
•
OSPF
•
BGP
•
Autonomous System Path
•
Tag
•
Direct
•
Static
•
Aggregate
Once you have configured these export sources, you can use them to create or modify a
number of routing policies using a variety of source protocols.
The procedure for defining an export source depends on whether you are configuring a
new source or modifying an existing one. Separate discussions on these tasks for the
various protocol types follow.
Configuring and Modifying RIP Export Sources
A RIP export source building block specifies a source for exporting RIP routes into other
protocols.
To define RIP export source building blocks:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
CoreWatch User's Manual
Chapter 16: Configuring Routing Policies on the SSR
306.
"Configuring Aggregate
309
Advertisement
Table of Contents
