Table of Contents
Advertisement
•
Specifying to what you want the flow to apply. You apply IP and IPX flows to one or
more interfaces. You apply Layer-2 flows to one or more ports.
The method you use to create a QoS profile depends on whether you are defining an IP,
IPX, or Layer-2 flow. Separate discussions on creating QoS policies for the different flow
types follow.
Creating a QoS Profile for an IP Flow
To create a QoS profile for an IP flow:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's QoS
Configuration object.
3.
Click the Configure New QoS Profile object.
Configuration Expert opens the QoS wizard.
4.
Click Next.
Configuration Expert prompts you to specify which type of flow you want to define.
The default is IP Flow.
CoreWatch User's Manual
Figure 109. QoS wizard (IP flow)
Chapter 12: Configuring QoS on the SSR
185
Advertisement
Table of Contents
