Table of Contents
Advertisement
Chapter 13: Configuring Security on the SSR
5.
In the list of filters that appears, click the one you want to modify.
Configuration Expert displays the selected filter's dialog box.
6.
Edit the dialog box.
The options of a filter's dialog box are the same as those you specify when creating
such a filter. For details on a filter's options, see the section that discusses setting that
type of filter.
7.
Click OK.
Modifying a Filter's Port Bindings
You can modify to which ports a filter applies. For Layer-2 static entries, you may also
change to which ports the entry is allowing, disallowing, or forcing packets. To perform
these tasks, you modify a filter's port bindings.
To modify a filter's port bindings:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Security Configuration object.
3.
Double-click the L2 Security object.
4.
Double-click the object appropriate for the type of filter you want to edit (L2 Address
Filters, L2 Port Address Lock Filters, L2 Secure Port Filters, or L2 Static Entries).
5.
In the list of filters that appears, double-click the one you want to modify.
Configuration Expert displays the filter's Bound Port List object. That object includes
the ports to which the filter applies.
If you are modifying a Layer-2 static entry, Configuration Expert also displays an Out
Port List object. That object includes the ports to which the entry is allowing,
disallowing, or forcing packets.
6.
Click the port list object you want to modify.
A Bound Port List dialog box similar to the following appears:
244
CoreWatch User's Manual
Advertisement
Table of Contents
