Chapter 16: Configuring Routing Policies on the SSR
–
If you do not want the SSR to export any routes from the source, select the Restrict
export to the specified Tag source option.
–
If you want the SSR to associate a metric with the exported route, select a metric
from the Route Metric drop-down list. Select Inherited if you want the route to use
the policy's default metric. Otherwise, select a number from 1 to 16.
12. Click OK.
13. Repeat
include in your export policies.
Configuring and Modifying Direct Export Sources
A direct export source building block controls the export of routes from a source with
routes directly attached to interfaces. To define direct export source building blocks that
can be used for either RIP or OSPF:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Unicast Routing object.
5.
Double-click the Routing Policy Configuration object.
6.
Double-click the Building Blocks object.
7.
Double-click the Export Source object.
8.
Double-click the Direct object, and then do one of the following:
–
If you are creating a new export source, click the Configure New Direct Export
Source object.
–
If you are modifying an existing export source, select that export source.
A Direct Export Source dialog box similar to the following appears:
318
step 9
through
step 12
until you create all of the tag export sources you plan to
CoreWatch User's Manual