Removing And Installing The Front Bezel; Bezel Snap-Ons - Intel H2000G Series Service Manual

Removing and Installing the Front Bezel

The server chassis supports the installation of an optional front bezel (Intel
product code: A2UBEZEL). The bezel kit includes a plastic lockable front bezel
and multiple bezel snap-ons allowing for OEM differentiation.

Bezel Snap-ons

The bezel kit provides three different bezel snap-ons to allow for OEM
differentiation; two different size badging snap-ons, and one decorative wave
snap-on.
To mount the snap-on to the bezel, insert the snap-on hooks into the bezel and
press to snap it into place.
To remove the snap-on from the bezel, squeeze the hooks at the rear of the
snap-on to release it (see letter A). Then remove the snap-on from the bezel (see
letter B).
Badge
Figure 15. Installing the Snap-on to the Front Bezel
B
Badge
Figure 16. Removing the Snap-on from the Front Bezel
AF005159
A
AF005160
12