Removing And Installing The Air Duct; Removing The Air Duct; Figure 12. Cable Routing; Figure 13. Removing The Air Duct - Intel S2600TP series Service Manual

Intel® Server Board S2600TP and Intel® Compute Module HNS2600TP Product Family
2.3

Removing and Installing the Air Duct

Always operate your compute module with the air duct in place. The air duct is required for proper airflow
within the compute module.
2.3.1

Removing the Air Duct

1. Press and hold both the left and right side buttons of the air duct (see letter A).
2. Slowly lift the rear end of the air duct (see letter B).
3. Rotate the air duct more than 45 degrees and pull out.
10
Orange line: Fan cable connection
Red line: Mother
connection Blue line:
connection
Figure 12. Cable Routing
Figure 13. Removing the Air Duct
board power cable
Fan control signal cable