Replacing System Fans; Figure 45. Disconnecting System Fan Cable; Figure 46. Lifting System Fan; Figure 47. Inserting Fan Into The Fan Cage - Intel SR1670HV - Server System - 0 MB RAM Service Manual
Server system
Hide thumbs
Also See for SR1670HV - Server System - 0 MB RAM:
- Technical product specification (92 pages)
Table of Contents
Advertisement
4.2 Replacing System Fans
To uninstall the system fans:
CAUTION
Verify the system is powered off before removing any system fan
from the system. The system fans operate at very high speeds
and may cause serious injury.
1. Disconnect the system fan cable from the fan connector on the server board.
2. Lift the fan and set it aside.
3. Repeat Steps 1 and 2 to uninstall other system fans.
To reinstall a system fan:
1. Insert the fan into the fan cage. The airflow directional arrow on the fan side should
point towards the system rear panel.
2. Connect the system fan cable to the fan connector on the server board.
®
Intel
Server System SR1670HV Service Guide
Figure 45. Disconnecting System Fan Cable
Figure 46. Lifting System Fan
Figure 47. Inserting Fan Into the Fan Cage
System Service
29
Advertisement
Table of Contents
Need help?
Do you have a question about the SR1670HV - Server System - 0 MB RAM and is the answer not in the manual?
Questions and answers