Boot Menu - Intel SR1670HV - Server System - 0 MB RAM Service Manual

6.3.5.2.2
Selects the serial port for console redirection.
Configuration options: [COM1] [COM2]
6.3.5.2.3
This item is not user-configurable and changes with the configuration of Serial port
number.
6.3.5.2.4
Sets the Serial port mode.
Configuration options: [115200 8,n,1] [57600 8,n,1] [38400 8,n,1] [19200 8,n,1] [09600
8,n,1]
6.3.5.2.5
Allows you to select the flow control for console redirection.
Configuration options: [None] [Hardware] [Software]
6.3.5.2.6
Sets the redirection mode after the BIOS Power-On Self-Test (POST). Some operating
system may not work when set to [Always].
Configuration options: [Disabled] [Boot Loader] [Always]
6.3.5.2.7
Allows you to select the target terminal type.
Configuration options: [ANSI] [VT100] [VT-UTF8]
6.3.5.2.8
This item appears only when you set the Terminal Type item to [ANSI] or [VT100] and
allows you to enable or disable the VT-UTF8 combo key support for ANSI or VT100
terminals.
Configuration options: [Disabled] [Enabled]
6.3.6

Boot Menu

The Boot menu items allow you to change the system boot options. Select an item and
then press <Enter> to display the sub-menu.
®
Intel Server System SR1670HV Service Guide
Serial port number [COM2]
Base Address. IRQ [2F8h, 3]
Serial port Mode [57600 8,n,1]
Flow Control [Hardware]
Redirection After BIOS POST [Disabled]
Terminal Type [VT-UTF8]
VT-UTF8 Combo Key Support [Enabled]
BIOS Updates and Configuration
75