Figure 57; Figure 58 Detached Control Panel Module - Intel SR1670HV - Server System - 0 MB RAM Service Manual

System Service
4. Carefully detach each cable pair from both control panel boards.
5. Place the detached Control Panel module onto an anti-static surface.
6. Take out the faulty Control Panel board by removing the three screws that attach it to
the module tray.
7. Unpack the replacement Control Panel board and place it onto the module tray,
making sure the Control Panel buttons protrude out of the faceplate holes and screw
holes are in alignment with the screw mounts.
8. Using the three screws, fasten the Control Panel board to the module tray. Be careful
not to overtighten them.
9. Turn over the Control Panel Module and place it in front of the Module bay at the
front of the system.
10. Reattach each cable pair to the appropriate Control Panel board.
11. Carefully slide the Control Panel Module back into the module bay until the screw
holes are in alignment.
12. Using the single screw, fasten the Control Panel module to the chassis.
34
Figure 57 Control Panel Module Top view

Figure 58 Detached Control Panel Module

®
Intel Server System SR1670HV Service Guide