Table of Contents
Advertisement
3.16 System Fan Replacement
The Intel® Server D40AMP Family includes four 80mm fans at the front of the chassis, and six 40mm fans
located in the back of the chassis for a total of 10 dual rotor system fans. This section provides instructions
to replace both the 80mm and 40mm system fans. The following figure identifies their location in the server
chassis.
3.16.1
Replacing 80-mm System Fans
Caution: To minimize possible performance degradation and other thermal related issues, system fan
replacement while the system is operational should be performed as quickly as possible.
Required Tools and Supplies:
•
Anti-static wrist strap and conductive workbench pad (recommended)
1. While pushing the green latch in the shown direction (see Letter A), use the handle to pull the system fan
assembly out of the bay (see Letter B).
Intel® Server D40AMP Family Integration and Service Guide
Figure 84. System Fan Configuration
Figure 85. 80mm System Fan Removal
69
Advertisement
Table of Contents
