Rack Mount Warnings - Intel SR1670HV - Server System - 0 MB RAM Service Manual

Server system
Hide thumbs Also See for SR1670HV - Server System - 0 MB RAM:
Table of Contents

Advertisement

Disconnect all cables and telecommunication lines that are connected to the
system.
Retain all screws or other fasteners when removing access cover(s). Upon
completion of accessing inside the product, refasten access cover with original
screws or fasteners.
Do not access the inside of the power supply. There are no serviceable parts in
the power supply. Return to manufacturer for servicing.
Power down the server and disconnect all power cords before adding or
replacing any non hot-plug component.
When replacing a hot-plug power supply, unplug the power cord to the power
supply being replaced before removing the power supply from the server.
CAUTION
If the server has been running, any installed processor(s) and heatsink(s) may be hot.
Unless you are adding or removing a hot-plug component, allow the system to cool before
opening the covers. To avoid the possibility of coming into contact with hot component(s)
during a hot-plug installation, be careful when removing or installing the hot-plug
component(s).
CAUTION
To avoid injury do not contact moving fan blades. If your system is supplied with a guard
over the fan, do not operate the system without the fan guard in place.

Rack Mount Warnings

The equipment rack must be anchored to an unmovable support to prevent it from tipping
when a server or piece of equipment is extended from it. The equipment rack must be
installed according to the rack manufacturer's instructions.
Install equipment in the rack from the bottom up, with the heaviest equipment at the
bottom of the rack.
Extend only one piece of equipment from the rack at a time.
You are responsible for installing a main power disconnect for the entire rack unit. This
main disconnect must be readily accessible, and it must be labeled as controlling power to
the entire unit, not just to the server(s).
To avoid risk of potential electric shock, a proper safety ground must be implemented for
the rack and each piece of equipment installed in it.
®
Intel
Server System SR1670HV Service Guide
Safety Information
117

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR1670HV - Server System - 0 MB RAM and is the answer not in the manual?

Table of Contents