Lan Controller Setting (3-Poin Lan_Sw1, Lan_Sw2); Intel ® Ich10R Sata Port Sw Raid Setting (3-Pin Raid_Sel1); Figure 61. Ddr3 Voltage Control Setting; Figure 62. Lan Controller Setting - Intel SR1670HV - Server System - 0 MB RAM Service Manual

5.1.4

LAN Controller Setting (3-poin LAN_SW1, LAN_SW2)

These jumpers allow you to enable or disable the onboard Intel
controllers. Set to pins 1-2 to activate the Gigabit LAN feature.
®
5.1.5 Intel ICH10R SATA Port SW RAID Setting (3-pin
RAID_SEL1)
This jumper allows you to select the Serial ATA RAID configuration utility to use when you
create disk arrays. Place the jumper caps on pins 1-2 to select the LSI* SATA Software
RAID utility (default); otherwise, place the jumper caps on pins 2-3 to use the Intel
Storage Manager (IMSM)
®
Intel Server System SR1670HV Service Guide

Figure 61. DDR3 Voltage Control Setting

Figure 62. LAN Controller Setting

Jumpers, Connectors, and LEDs
®
82574LGigabit LAN
®
Matrix
37