Removing And Installing The System Fans; Replacing The System Fans - Intel SR1690WB - Server System - 0 MB RAM Service Manual
A guide for technically qualified assemblers of intel identified subassemblies/ products
Hide thumbs
Also See for SR1690WB - Server System - 0 MB RAM:
Table of Contents
Advertisement
Removing and Installing the System Fans
Caution: The system fans are NOT hot-swappable. Before removing or replacing, you must first
take the server out of service, turn off all peripheral devices connected to the system, turn
off the system by pressing the power button, and unplug the AC power cord from the
system or wall outlet.
Note: The fans that are integrated into the power supply cannot be replaced separately. If one of
the fans in the power supply fails, you must replace the power supply.
The system fans are located in the front of the server system, which you can individually
replace if one of them fails. If a fan in the power supply fails, you must replace the power
supply. Use the following steps to replace a system fan.
Replacing the System Fans
1. Remove the processor air duct. For instructions, see
Duct".
44
"Removing the Processor Air
®
Intel
Server System SR1690WB Service Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the SR1690WB - Server System - 0 MB RAM and is the answer not in the manual?