Monitoring And Maintaining Ip Multicast Routing; Clearing Caches, Tables, And Databases - Cisco Catalyst 3750 Software Configuration Manual

Metro switch
Hide thumbs Also See for Catalyst 3750:
Table of Contents

Advertisement

Chapter 31
Configuring IP Multicast Routing
Command
Step 3
ip dvmrp metric-offset [in | out]
increment
Step 4
end
Step 5
show running-config
Step 6
copy running-config startup-config
To return to the default setting, use the no ip dvmrp metric-offset interface configuration command.

Monitoring and Maintaining IP Multicast Routing

These sections describe how to monitor and maintain IP multicast routing:

Clearing Caches, Tables, and Databases

You can remove all contents of a particular cache, table, or database. Clearing a cache, table, or database
might be necessary when the contents of the particular structure are or suspected to be invalid.
You can use any of the privileged EXEC commands in
and databases:
Table 31-4 Commands for Clearing Caches, Tables, and Databases
Command
clear ip cgmp
clear ip dvmrp route {* | route}
78-15870-01
Clearing Caches, Tables, and Databases, page 31-49
Displaying System and Network Statistics, page 31-50
Monitoring IP Multicast Routing, page 31-51
Purpose
Change the metric added to DVMRP routes advertised in incoming
interfaces.
The keywords have these meanings:
(Optional) in—Specifies that the increment value is added to
incoming DVMRP reports and is reported in mrinfo replies.
(Optional) out—Specifies that the increment value is added to
outgoing DVMRP reports for routes from the DVMRP routing
table.
If neither in nor out is specified, in is the default.
For increment, specify the value that is added to the metric of a DVMRP
router advertised in a report message. The range is 1 to 31.
If the ip dvmrp metric-offset command is not configured on an
interface, the default increment value for incoming routes is 1, and the
default for outgoing routes is 0.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Table 31-4
Purpose
Clear all group entries the Catalyst switches have
cached.
Delete routes from the DVMRP routing table.
Catalyst 3750 Metro Switch Software Configuration Guide
Monitoring and Maintaining IP Multicast Routing
to clear IP multicast caches, tables,
31-49

Advertisement

Table of Contents
loading

Table of Contents