Monitoring And Maintaining Ip Multicast Routing; Clearing Caches, Tables, And Databases; Displaying System And Network Statistics - Cisco ME 3400 Software Configuration Manual

Monitoring and Maintaining IP Multicast Routing

Command
Step 7
show running-config
Step 8
copy running-config startup-config
To remove the boundary, use the no ip multicast boundary interface configuration command.
This example shows how to set up a boundary for all administratively-scoped addresses:
Switch(config)# access-list 1 deny 239.0.0.0 0.255.255.255
Switch(config)# access-list 1 permit 224.0.0.0 15.255.255.255
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# ip multicast boundary 1
Monitoring and Maintaining IP Multicast Routing
•
•
•

Clearing Caches, Tables, and Databases

You can remove all contents of a particular cache, table, or database. Clearing a cache, table, or database
might be necessary when the contents of the particular structure are or suspected to be invalid.
You can use any of the privileged EXEC commands in
and databases:
Table 42-6
Command
clear ip igmp group [group-name |
group-address | interface]
clear ip mroute {* | group [source]}
clear ip pim auto-rp rp-address
clear ip sdr [group-address | "session-name"]

Displaying System and Network Statistics

You can display specific statistics, such as the contents of IP routing tables, caches, and databases.
This release does not support per-route statistics.
Note
You can display information to learn resource utilization and solve network problems. You can also
display information about node reachability and discover the routing path your device's packets are
taking through the network.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
42-46
Clearing Caches, Tables, and Databases, page 42-46
Displaying System and Network Statistics, page 42-46
Monitoring IP Multicast Routing, page 42-47
Commands for Clearing Caches, Tables, and Databases
Purpose
Verify your entries.
(Optional) Save your entries in the configuration file.
Table 42-6
Purpose
Delete entries from the IGMP cache.
Delete entries from the IP multicast routing table.
Clear the Auto-RP cache.
Delete the Session Directory Protocol Version 2
cache or an sdr cache entry.
Chapter 42 Configuring IP Multicast Routing
to clear IP multicast caches, tables,
OL-9639-07