Editing A Foundscan Scanner; Deleting A Foundscan Scanner; Importing Custom Certificates - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - MANAGING VULNERABILITY ASSESSMENT V1 Manual

32 M F
ANAGING OUND
Editing a
FoundScan
Scanner
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Deleting a
FoundScan
Scanner
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Importing Custom
Certificates
Step 1
S S
CAN CANNERS
To edit an FoundScan scanner:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the VA Scanners icon.
The VA Scanners window appears.
Select the scanner you wish to edit.
Click Edit.
The Edit Scanner window appears.
Update parameters, as necessary. See
Click Save.
From the STRM Administration Console menu, select Configurations > Deploy
Configuration Changes.
To delete a FoundScan scanner:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the VA Scanners icon.
The VA Scanners window appears.
Select the scanner you wish to delete.
Click Delete.
A confirmation window appears.
Click Ok.
From the STRM Administration Console menu, select Configurations > Deploy
Configuration Changes.
If the FoundScan Engine includes custom certificates, you must import the
certificates on each STRM managed host that will host the VIS component. Before
you perform the below procedure, make sure the FoundScan scanner is installed.
To import custom certificates:
Obtain two certificate files from your FoundScan administrator.
The first file is the CA certificate for the FoundScan engine. The second certificate
is the private key plus certificate chain for the client.
Managing Vulnerability Assessment
Table 7-2.