Network Configuration Fields - Cisco 7800 Series Administration Manual

Cisco IP Phone Installation
Procedure
Step 1
Press Applications
Step 2 Select Network configuration.
Step 3
Use the navigation arrows to select the desired menu and edit.
Step 4 To display a submenu, repeat step 3.
Step 5
To exit a menu, press Back .

Network Configuration Fields

Table 8: Network Configurations Menu Options
Field Field Type or
Choices
Ethernet
configuration
IP mode Dual mode
IPv4 only
IPv6 only
IPv4 address settings DHCP
Static IP
Release DHCP IP
IPv6 address settings DHCP
Static IP
DHCPv6 option to
use
Web server On
Off
.
Default Description
See the following Ethernet configuration submenu table.
Dual mode Select the Internet Protocol mode for which the phone operates.
In dual mode, the phone can have both IPv4 and IPv6 addresses.
DHCP See the IPv4 address submenu table in the following tables.
DHCP See the IPv6 address submenu table in the following tables.
17, 160, 159 Indicates the order in which the phone uses the IPv6 addresses
provided by DHCP server.
On Indicates whether the phone has web server enabled or disabled.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
Network Configuration Fields
37