Command Line Processing; Table 21-3 Keystroke Commands - SMC Networks TigerStack II SMC8926EM Management Manual

Command Line Processing

Commands are not case sensitive. You can abbreviate commands and parameters
as long as they contain enough letters to differentiate them from any other currently
available commands or parameters. You can use the Tab key to complete partial
commands, or enter a partial command followed by the "?" character to display a list
of possible matches. You can also use the following editing keystrokes for
command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-N
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or backspace key

Table 21-3 Keystroke Commands

Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates the current task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes all characters from the cursor to the end of the line.
Repeats current command line on a new line.
Enters the next command line in the history buffer.
Enters the last command.
Repeats current command line on a new line.
Deletes from the cursor to the beginning of the line.
Deletes the last word typed.
Moves the cursor back one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.
Entering Commands
21
21-9