Static Multicast Routing Commands; Table 4-68 Static Multicast Routing Commands - SMC Networks 6152L2 - annexe 1 Management Manual

C L
OMMAND INE
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The switch must use IGMPv2 for this command to take effect.
Example
The following shows how to configure the default timeout to 300 seconds.
Console(config)#ip igmp snooping router-port-expire-time 300
Console(config)#
Related Commands
ip igmp snooping version (4 -235)

Static Multicast Routing Commands

Command
ip igmp snooping vlan
mrouter
show ip igmp snooping
mrouter
ip igmp snooping vlan mrouter
This command statically configures a multicast router port. Use the no
form to remove the configuration.
Syntax
[no] ip igmp snooping vlan vlan-id mrouter interface
• vlan-id - VLAN ID (Range: 1-4093)
• interface
- ethernet unit/port
4-242
I
NTERFACE

Table 4-68 Static Multicast Routing Commands

Function
Adds a multicast router port
Shows multicast router ports
- unit - Stack unit. (Always unit 1)
Mode Page
GC 4-242
PE 4-243