Figure 3-92. Configuring Internet Group Management Protocol - SMC Networks 6152L2 - annexe 1 Management Manual

• IGMP Version — Sets the protocol version for compatibility with
other devices on the network. (Range: 1-2; Default: 2)
Notes: 1. All systems on the subnet must support the same version.
2. Some attributes are only enabled for IGMPv2, including
IGMP Report Delay and IGMP Query Timeout.
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP
settings as required, and then click Apply. (The default settings are shown
below.)

Figure 3-92. Configuring Internet Group Management Protocol

CLI – This example modifies the settings for multicast filtering, and then
displays the current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping query-time-out 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Service status
Querier status
Query count
Query interval
Query max response time : 20 sec
Router port expire time: 300 sec
IGMP snooping version
Console#
: Enabled
: Enabled
: 10
: 100 sec
: Version 2
M F
ULTICAST ILTERING
4-233
4-238
4-239
4-240
4-240
4-241
4-235
4-236
3-209