Resetting The System; Figure 3-20. Resetting The System - SMC Networks 6152L2 - annexe 1 Management Manual

CLI – Enter the host ip address, followed by the mail severity level, source
and destination email addresses and enter the sendmail command to
complete the action. Use the show logging command to display SMTP
information.
Console(config)#logging sendmail host 192.168.1.19
Console(config)#logging sendmail level 3
Console(config)#logging sendmail source-email
bill@this-company.com
Console(config)#logging sendmail destination-email
ted@this-company.com
Console(config)#logging sendmail
Console#

Resetting the System

Web – Click System, Reset. Click the Reset button to reboot the switch.
When prompted, confirm that you want reset the switch.
CLI – Use the reload command to restart the switch. When prompted,
confirm that you want to reset the switch.
Console#reload
System will be restarted, continue <y/n>?
Note: When restarting the system, it will always run the Power-On
Self-Test.

Figure 3-20. Resetting the System

B C
ASIC ONFIGURATION
4-30
3-41