Displaying Vlan Information; Table 4-57 Displaying Vlan Information - SMC Networks 6152L2 - annexe 1 Management Manual

C L
OMMAND INE
Command Usage
• This command prevents a VLAN from being automatically added to
the specified interface via GVRP.
• If a VLAN has been added to the set of allowed VLANs for an
interface, then you cannot add it to the set of forbidden VLANs for
that same interface.
Example
The following example shows how to prevent port 1 from being added to
VLAN 3.
Console(config)#interface ethernet 1/1
Console(config-if)#switchport forbidden vlan add 3
Console(config-if)#

Displaying VLAN Information

Command
show vlan
show interfaces status
vlan
show interfaces
switchport
show vlan
This command shows VLAN information.
Syntax
show vlan [id vlan-id | name vlan-name]
• id - Keyword to be followed by the VLAN ID.
• vlan-id - ID of the configured VLAN. (Range: 1-4093, no leading
zeroes)
• name - Keyword to be followed by the VLAN name.
• vlan-name - ASCII string from 1 to 32 characters.
4-208
I
NTERFACE

Table 4-57 Displaying VLAN Information

Function
Shows VLAN information
Displays status for the specified VLAN
interface
Displays the administrative and
operational status of an interface
Mode Page
NE, 4-208
PE
NE, 4-153
PE
NE, 4-156
PE