Table 4-60 Priority Commands; Show Queue Mode; Show Queue Bandwidth - SMC Networks 6152L2 - annexe 1 Management Manual

Example
The following example shows how to change the CoS assignments to a
one-to-one mapping.
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map 0 0
Console(config-if)#queue cos-map 1 1
Console(config-if)#queue cos-map 2 2
Console(config-if)#exit
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 0 1 2 3 4 5 6 7
Console#
Related Commands
show queue cos-map (4 -228)

show queue mode

This command shows the current queue mode.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#sh queue mode
Wrr status: Enabled
Console#

show queue bandwidth

This command displays the weighted round-robin (WRR) bandwidth
allocation for the eight priority queues.
Default Setting
None
P C
RIORITY OMMANDS
4-227