Dot1X Default - SMC Networks 6152L2 - annexe 1 Management Manual

dot1x system-auth-control
This command enables IEEE 802.1X port authentication globally on the
switch. Use the no form to restore the default.
Syntax
[no] dot1x system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
Console(config)#dot1x system-auth-control
Console(config)#

dot1x default

This command sets all configurable dot1x global and port settings to their
default values.
Syntax
dot1x default
Command Mode
Global Configuration
Example
Console(config)#dot1x default
Console(config)#
A
UTHENTICATION
C
OMMANDS
4-105