Managing Firmware; Figure 3-8. Enabling Jumbo Frames - SMC Networks 6152L2 - annexe 1 Management Manual

C
ONFIGURING THE
Web – Click System, Jumbo Frames.
CLI – Specify the jumbo frame status.
Console#config
Console(config)#jumbo frame
Console(config)#

Managing Firmware

You can upload/download firmware to or from a TFTP server. By saving
runtime code to a file on a TFTP server, that file can later be downloaded
to the switch to restore operation. You can also set the switch to use new
firmware without overwriting the previous version.
Note: Runtime code can also be upgraded by using Batch Upgrade.
Batch Upgrade can discover switches on local, or other networks.
After discovering the switches, Batch Upgrade can then be set to
automatically upgrade the runtime code on all discovered switches.
Batch Upgrade is provided in the Batch Upgrade folder in the CD
provided with this switch. For details see the Batch Upgrade
document in this Batch Upgrade folder.
Command Attributes
• File Transfer Method – The firmware copy operation includes these
options.
- file to file – Copies a file within the switch directory, assigning it a
new name.
- file to tftp – Copies a file from the switch to a TFTP server.
- tftp to file – Copies a file from a TFTP server to the switch.
3-24
S
WITCH

Figure 3-8. Enabling Jumbo Frames