Displaying Port Members Of Multicast Groups; Figure 3-102. Mvr Port Information - SMC Networks 6152L2 - annexe 1 Management Manual

C
ONFIGURING THE
multicast traffic from one of the MVR groups, or a multicast group has
been statically assigned to an interface.
• Immediate Leave – Shows if immediate leave is enabled or disabled.
• Trunk Member – Shows if port is a trunk member (Port Information
only).
Web – Click MVR, Port or Trunk Information.
CLI – This example shows information about interfaces attached to the
MVR VLAN.
Console#show mvr interface
Port
------- -------- ------------- ---------------
eth1/1
eth1/2
Console#

Displaying Port Members of Multicast Groups

You can display the multicast groups assigned to the MVR VLAN either
through IGMP snooping or static configuration.
Field Attributes
• Group IP – Multicast groups assigned to the MVR VLAN.
3-222
S
WITCH

Figure 3-102. MVR Port Information

Type Status
SOURCE ACTIVE/UP
RECEIVER ACTIVE/UP
Immediate Leave
Disable
Disable
4-213