Web – Click DHCP Snooping, Information Option Configuration.
CLI – This example shows how to enable the DHCP Snooping Trust
Status for ports
Console(config)#interface ethernet 1/5
Console(config-if)#ip dhcp snooping trust
Console(config-if)#
DHCP Snooping Binding Information
Displays the DHCP snooping binding information.
Command Attributes
•
No. – Entry number for DHCP snooping binding information.
•
Unit – Stack unit.
•
Port – Port number.
•
VLAN ID – ID of a configured VLAN (Range: 1-4093)
•
MAC Address – A valid unicast MAC address.
•
IP Address – A valid unicast IP address.
•
IP Address Type – Indicates an IPv4 or IPv6 address type.
•
Lease Time (Seconds) – The time after which an entry is removed
from the table.
Figure 3-109. DHCP Snooping Port Configuration
.
DHCP S
NOOPING
4-226
3-233
Need help?
Do you have a question about the 6152L2 - annexe 1 and is the answer not in the manual?