Clear Mac-Address-Table Dynamic - SMC Networks 6152L2 - annexe 1 Management Manual

Tigerswitch 10/100 48-port 10/100 mbps fast ethernet managed switch
Hide thumbs Also See for 6152L2 - annexe 1:
Table of Contents

Advertisement

Command Usage
The static address for a host device can be assigned to a specific port
within a specific VLAN. Use this command to add static addresses to
the MAC Address Table. Static addresses have the following
characteristics:
• Static addresses will not be removed from the address table when a
given interface link is down.
• Static addresses are bound to the assigned interface and will not be
moved. When a static address is seen on another interface, the address
will be ignored and will not be written to the address table.
• A static address cannot be learned on another port until the address is
removed with the no form of this command.
Example
Console(config)#mac-address-table static 00-e0-29-94-34-de
interface ethernet 1/1 vlan 1 delete-on-reset
Console(config)#

clear mac-address-table dynamic

This command removes any learned entries from the forwarding database
and clears the transmit and receive counts for any static or system
configured entries.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#clear mac-address-table dynamic
Console#
A
T
DDRESS
ABLE
C
OMMANDS
4-179

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6152L2 - annexe 1 and is the answer not in the manual?

This manual is also suitable for:

Tigerswitch smc6152l2

Table of Contents