Table 4-43 Show Interfaces Switchport - Display Description - SMC Networks 6152L2 - annexe 1 Management Manual

Table 4-43 show interfaces switchport - display description

Field
Broadcast threshold
LACP status
Ingress rate limit
VLAN membership
mode
Ingress rule
Acceptable frame
type
Native VLAN
Priority for untagged
traffic
GVRP status
Allowed VLAN
Forbidden VLAN
Private VLAN mode Shows the private VLAN mode as host, promiscuous,or
Private VLAN
host-association
Private VLAN
mapping
Description
Shows if broadcast storm suppression is enabled or
disabled; if enabled it also shows the threshold level
(page 4-158).
Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-166).
Shows if rate limiting is enabled, and the current rate limit.
(page 4-162).
Indicates membership mode as Trunk or Hybrid
(page 4-202).
Shows if ingress filtering is enabled or disabled
(page 4-204).
Note: Ingress filtering is always enabled.
Shows if acceptable VLAN frames include all types or
tagged frames only (page 4-202).
Indicates the default Port VLAN ID (page 4-205).
Indicates the default priority for untagged frames
(page 4-221).
Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-218).
Shows the VLANs this interface has joined, where "(u)"
indicates untagged and "(t)" indicates tagged (page 4-206).
Shows the VLANs this interface can not dynamically join
via GVRP (page 4-207).
none.
Shows the secondary (or community) VLAN with which
this port is associated.
Shows the primary VLAN mapping for a promiscuous
port.
I C
NTERFACE OMMANDS
4-157