Show Spanning-Tree - SMC Networks 6152L2 - annexe 1 Management Manual

C L
OMMAND INE

show spanning-tree

This command shows the configuration for the common spanning tree
(CST).
Syntax
show spanning-tree [interface]
• interface
- ethernet unit/port
- port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use the show spanning-tree command with no parameters to
display the spanning tree configuration for the switch for the
Common Spanning Tree (CST) and for every interface in the tree.
• Use the show spanning-tree interface command to display the
spanning tree configuration for an interface within the Common
Spanning Tree (CST).
• For a description of the items displayed under "Spanning-tree
information," see "Configuring Global Settings" on page 4 -149. For
a description of the items displayed for specific interfaces, see
"Displaying Interface Settings" on page 4 -153.
4-196
I
NTERFACE
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-30)