Show Cluster; Show Cluster Members - SMC Networks 6152L2 - annexe 1 Management Manual

Command Usage
• This command only operates through a Telnet connection to the
Commander switch. Managing cluster Members using the local
console CLI on the Commander is not supported.
• There is no need to enter the username and password for access to the
Member switch CLI.
Example
Vty-0#rcommand id 1
CLI session with the SMC6152L2 is opened.
To end the CLI session, enter [Exit].
Vty-0#

show cluster

This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
Console#show cluster
Role: commander
Interval heartbeat: 30
Heartbeat loss count: 3
Number of Members: 1
Number of Candidates: 2
Console#

show cluster members

This command shows the current switch cluster members.
Command Mode
Privileged Exec
S C
WITCH LUSTER
C
OMMANDS
4-269