Priority Commands (Layer 3 And 4); Table 4-63 Priority Commands (Layer 3 And 4) - SMC Networks 6152L2 - annexe 1 Management Manual

Priority Commands (Layer 3 and 4)

Command
map ip dscp
map ip dscp
map access-list ip
show map ip dscp
show map access-list
ip
map ip dscp (Global Configuration)
This command enables IP DSCP mapping (i.e., Differentiated Services
Code Point mapping). Use the no form to disable IP DSCP mapping.
Syntax
[no] map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP DSCP, and default
switchport priority.
Example
The following example shows how to enable IP DSCP mapping globally.
Console(config)#map ip dscp
Console(config)#

Table 4-63 Priority Commands (Layer 3 and 4)

Function
Enables IP DSCP class of service
mapping
Maps IP DSCP value to a class of service IC
Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
Shows the IP DSCP map
Shows CoS value mapped to an access list
for an interface
P C
RIORITY OMMANDS
Mode Page
GC
IC
PE
PE
4-229
4-229
4-230
4-120
4-231
4-121