Table 4-39 Show Snmp View - Display Description - SMC Networks 6152L2 - annexe 1 Management Manual

C L
OMMAND INE
Example
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: nonvolatile
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: nonvolatile
Row Status: active
Console#
Field
View Name
Subtree OID
View Type
Storage Type
Row Status
snmp-server group
This command adds an SNMP group, mapping SNMP users to SNMP
views. Use the no form to remove an SNMP group.
Syntax
snmp-server group groupname {v1 | v2c | v3 {auth | noauth |
priv}} [read readview] [write writeview] [notify notifyview]
no snmp-server group groupname
• groupname - Name of an SNMP group. (Range: 1-32 characters)
• v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
- auth | noauth | priv - This group uses SNMPv3 with
authentication, no authentication, or with authentication and
privacy. See "Simple Network Management Protocol" on
page 3-44 for further information about these authentication and
encryption options.
4-138
I
NTERFACE

Table 4-39 show snmp view - display description

Description
Name of an SNMP view.
A branch in the MIB tree.
Indicates if the view is included or excluded.
The storage type for this entry.
The row status of this entry.