Dhcp Snooping Commands; Table 4-71 Dhcp Snooping Commands - SMC Networks 6152L2 - annexe 1 Management Manual

show ip source-guard binding
This command shows the source guard binding table.
Command Mode
Privileged Exec
Example
Console#show ip source-guard binding
MacAddress
----------------- ------------- ---------- --------- ---- ---------
11-22-33-44-55-66 192.168.0.99
Console#

DHCP Snooping Commands

DHCP snooping allows a switch to protect a network from rogue DHCP
servers or other devices which send port-related information to a DHCP
server. This information can be useful in tracking an IP address back to a
physical port. This section describes commands used to configure DHCP
snooping.
Command
ip dhcp snooping Enables DHCP snooping globally
ip dhcp snooping
vlan
ip dhcp snooping
trust
ip dhcp snooping
verify
mac-address
ip dhcp snooping
information
option
ip dhcp snooping
information
policy
IpAddress

Table 4-71 DHCP Snooping Commands

Function
Deletes entries from the host
name-to-address table
Defines a default domain name for
incomplete host names
Defines a list of default domain names for
incomplete host names
Specifies the address of one or more name
servers to use for host name-to-address
translation
Enables DNS-based host name-to-address
translation
DHCP S
Lease(sec) Type
0 Static
C
NOOPING OMMANDS
VLAN Interface
1 Eth 1/5
Mode Page
GC 4-256
GC 4-258
IC 4-259
GC 4-260
GC 4-261
GC 4-262
4-255