Mac-Address-Table Static - SMC Networks 6152L2 - annexe 1 Management Manual

C L
OMMAND INE
Command
mac-address-table aging-time Sets the aging time of the address
show mac-address-table
aging-time

mac-address-table static

This command maps a static address to a destination port in a VLAN. Use
the no form to remove an address.
Syntax
mac-address-table static mac-address interface interface
vlan vlan-id [action]
no mac-address-table static mac-address vlan vlan-id
• mac-address - MAC address.
• interface
- ethernet unit/port
- port-channel channel-id (Range: 1-6)
• vlan-id - VLAN ID (Range: 1-4093)
• action
- delete-on-reset - Assignment lasts until the switch is reset.
- permanent - Assignment is permanent.
Default Setting
No static addresses are defined. The default mode is permanent.
Command Mode
Global Configuration
4-178
I
NTERFACE
Table 4-52 Address Table Commands (Continued)
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-30)
Function
table
Shows the aging time for the
address table
Mode Page
GC 4-181
PE 4-182