Broadcast Commands; Broadcast Packet-Rate; Table 4-44 Broadcast Commands - SMC Networks 6152L2 - annexe 1 Management Manual

C L
OMMAND INE

Broadcast Commands

This section describes how to configure broadcast storm control for the
switch.
Command
broadcast
packet-rate
switchport
broadcast
show interfaces
switchport

broadcast packet-rate

This command configures the global broadcast storm control threshold
level.
Syntax
broadcast packet-rate rate
rate - Threshold level as a rate; i.e., packets per second.
(Range: 240 - 1488100)
Default Setting
500 packets per second
Command Mode
Global Configuration
Command Usage
• When broadcast traffic exceeds the specified threshold, packets above
that threshold are dropped.
• The specified threshold value applies to all ports on the switch.
4-158
I
NTERFACE

Table 4-44 Broadcast Commands

Function
Configures the global threshold level
Enables broadcast storm control for an
interface
Displays the administrative and operational
status of an interface
Mode Page
GC 4-158
IC 4-159
NE, 4-156
PE