Leds (Lights) - ZyXEL Communications LTE7461-M602 User Manual

Figure 2 Front and Rear Panels

1.6 LEDs (Lights)

None of the LEDs are on if the Zyxel Device is not receiving power.
Table 1 LTE7461-M602 LED Descriptions
Chapter 1 Introduction
COLOR STATUS DESCRIPTION
Red On The Zyxel Device is abnormal status.
Blinking The Zyxel Device is booting.
Slow
Amber On The WiFi network is activated.
Off The WiFi network is not activated.
On The Zyxel Device is registered and successfully connected to a mobile network.
Green
Blinking The Zyxel Device is not connected to Mobile network.
(slow)
Blinking The Zyxel Device is trying to connect to a 4G/3G network.
(fast)
Off There is no service.
Note: Blinking (slow) means the LED blinks once per second.
Blinking (fast) means the LED blinks once per 0.2 second.
LTE7461-M602 User's Guide
15