Make sure the power LED is on (not blinking).
1
Open the Web Configurator.
2
Click
3
Se tting s
Press the WPS button on another WPS-enabled device within range of the NBG7815.
4
Note: You must activate WPS in the NBG7815 and in another wireless device within two
minutes of each other.
For more information on using WPS, see
1.7 L EDs
Front Panel
Fig ure 4
The following table describes the front panel LED.
Table 1 Front Panel LED
C O L O R
White
Dark Blue
Chapter 1 Introduction
>
>
, and the press the WPS button.
WiFi
WPS
ST AT US
DESC RIPT IO N
On
The NBG7815 is receiving power.
Blinking
The NBG7815 is booting.
On
Blue tooth is ready.
Blinking
Blue tooth configuration is in process.
NBG7815 User's Guide
Section 7.2 on page
14
43.