Remote Management Screen - ZyXEL Communications LTE4506-M606 User Manual

even if they do not know your IP address.
First of all, you need to register a dynamic DNS account with www.dyndns.org. This is for people with a
dynamic IP from their ISP or DHCP server that would still like to have a domain name. The Dynamic DNS
service provider will give you a password or key.
Use the following screen to enable DDNS and configure DDNS settings on the LTE4506. To access this
screen, click Router > DDNS Settings.
Figure 45 Router > DDNS Settings
The following table describes the labels in this screen.
Table 36 Router > DDNS Settings
LABEL
Dynamic DNS Settings
Enable Dynamic
DNS
Server
Domain Name
User Name
Password
Apply
Reset

6.17 Remote Management Screen

Remote management allows you to determine which services/protocols can access which LTE4506
interface (if any) and from which computers. The following figure shows remote management of the
LTE4506 coming in from the WAN.
Chapter 6 Router
DESCRIPTION
Select the check box to enable DDNS in your LTE4506.
Select the name of your Dynamic DNS service provider.
Enter the domain name assigned to your LTE4506 by your Dynamic DNS service provider.
Enter the user name for the Dynamic DNS service provider.
Enter the password for the Dynamic DNS service provider.
Click this button to save your changes back to the LTE4506.
Click Reset to reload the previous configuration for this screen.
LTE4506 User's Guide
69