Printer Control - Printronix N7000 H-Series User Manual

PRINTER CONTROL

PRINTER
CONTROL
(from page 58 and 59)
Ribbon End Open Platen
Point @BOF
Darker +6 Disable*
Darker +5 Enable
Darker +4
Darker +3
Darker +2
Darker +1
Normal*
Lighter -1
Lighter -2
Lighter -3
Lighter -4
Lighter -5
Lighter -6
3
Lighter -7
Lighter -8
Lighter -9
Lighter -10
Display Accented
Language Char
English Standard*
Simp. Chinese* Tall
Ribbon End Point
This parameter adjusts the point at which the system will declare the ribbon
as being expended. The life count will always be from 100% to 0%, but if a
darker setting is selected 0% will be reached more quickly. If a lighter setting
is selected, the system will extend the time it takes to reach 0%. The range of
values are as follows:
•
Normal (default)
•
Darker +1 through Darker +6
•
Lighter -1 through Lighter -10
NOTE: This value can be adjusted at any time and the display will
Bar Code Tear Bar
2
Quality
Dark*
7.46 inches.*
Draft (4.5 - 10.5)
automatically adjust to show the correct percentage relative to the
new end point.
IGP/VGL Submenu
* Factory Default
1
Available for Pedestal printers only.
2
Available for N7000 STD Firmware only.
3
Default value for H-Series printers.
View
1 1
Dist. Function
Disable*
Enable
ADVANCED USER
Unidirectional
Disable*
Enable
145