Table of Contents
Advertisement
Chapter
4
NETWORK SETUP MENU
Gateway Address
A gateway address is the IP address of a hardware device (gateway) that
translates data between two incompatible networks, which can include
protocol translation.
MAC Address
This menu item is the Manufacturer's Assigned Number, and is unique for
each printer. It is read-only.
DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting.
The options include:
•
Disable (default)
•
Enable.
ADAPTER PARAMS
ADAPTER
PARAMS
(from page 87)
Novell
Nest Serv
Protocol
Type
Enable*
Auto*
Disable
Bindery
NDS
Ethernet
Keep Alive
Timer
Speed
Auto Select*
3 Minutes*
10 Half Duplex
2 - 10 Minutes
10 Full Duplex
100 Half Duplex
100 Full Duplex
You may enable or disable the Novell or NetBIOS Protocols within this menu,
as well as selecting which Novell Frame scheme to use in processing Novell
signals. See the Novell chapter in the Network Interface Card User's Manual
for more details.
88
NetBIOS
Novell
Protocol
Frame
Enable*
Ethernet 802.2*
Disable
802.2 Snap
Auto Sensing
Ethernet II
Ethernet 802.3
Job Control
Standard*
Enhanced
Off
* = Factory Default
ASCII
IPDS
Data Port
Data Port
9100*
5001*
1023 - 65535
1023-65535
Advertisement
Table of Contents
