Define Lf Code - Printronix P5000 Series User Manual

Chapter 4
LinePrinter Plus Emulation
Overstrike
This option enables you to print bold characters.
•
•

Define LF Code

•
•
Select SFCC
This parameter allows you to select which ASCII codes will function
as the Special Function Control Code (SFCC) command delimiter.
P-Series codes can use hex 00 through hex 7F. Options include the
following:
•
•
•
•
•
NOTE: SOH, ETX, and ESC are non-printables. The characters (^)
174
Enable. Turns on bold print. When enabled, overstrike printing
slows down the printer.
Disable. Turns off bold print.
LF = CR + LF. Forces an automatic carriage return with each
line feed command. The next print position is print position 1 of
the next line.
LF = LF. Does not perform an automatic carriage return. The
next print position will be the current print position of the next
line.
ESC (hex 1B)
SOH (hex 01)
ETX (hex 03)
CIRCUMFLEX (hex 5E)—also called caret (^)
TILDE (hex 7E)—(~)
and (~) are printable; however, do not use them as
printables in the host data stream if either is chosen as a
delimiter because print errors will occur.