802.1X Command; 802.1X Command List; Dot1X Re-Authenticate; Dot1X System-Auth-Control - TRENDnet TL2-G244 User Manual

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots

802.1X Command List

dot1x re-authenticate

Command
Syntax Description
Command Modes
User Guidelines
Example
Command History
31-1

dot1x re-authenticate


dot1x system-auth-control


aaa authentication dot1x default


dot1x local-database



radius-server host



dot1x control-direction


dot1x default

dot1x max-req

dot1x max-start

dot1x port-control

dot1x reauthenitcation

dot1x timeout

shutdown dot1x

debug dot1x

debug radius

show dot1x

show radius server

show radius statistics
To initial a re-authentication request immediately on 802.1X enable ports.
dot1x re-authenticate
<interface-id>]
interface
interface-type
interface-id
Privileged EXEC Mode
System will initial the re-authentication to all 802.1X enable ports when executing
this command without a port parameter.
switch# dot1x re-authenticate int fa 0/1
Version History
1.00.001 This command was introduced

802.1X Command

[interface
Specify the interface to send re-authentication request.
Interface-type including Fa (Fast Ethernet) or Gi (Gigabit
Ethernet).
Interface-id is slot/port number.
Chapter 31
<interface-type>