Changing Configuration Options - Paradyne FrameSaver SLV 9124 User Manual

Configuration

Changing Configuration Options

3-6
Procedure
To change configuration option settings:
1. From the Configuration Edit/Display menu, select a set of configuration
options and press Enter.
For example:
Configuration
2. Select the configuration options that are applicable to your network, and
make appropriate changes to the setting(s). See Chapter 2,
and Basic Operation
When creating new PVC connections or management PVCs, some
configuration options will be blank. For a valid setting to appear, Tab to the
configuration option and press the spacebar.
3. Repeat Steps 1 and 2 until all changes are complete.
NOTE:
— Only Security Access Level 1 users can change configuration options.
— Security Access Level 2 users can only view configuration options and
run tests.
— Security Access Level 3 users can only view configuration options; they
cannot change configuration options or run tests.
March 2000
PVC Connections
, for additional information.
User Interface
9124-A2-GB20-00