Table of Contents
Advertisement
When the NEXYGEN Plus PET has been
installed, a confirmation screen will be displayed
as shown.
Click on the CLOSE button then the installer will
automatically install the VBA components that
are required for NEXYGEN Plus PET.
When the screen closes, the NEXYGEN Plus
PET program is installed.
To complete the configuration, leave the CD in
the drive then start the NEXYGEN Plus PET
using the Windows Start button.
A screen similar to that shown will be displayed
while the VBA is automatically configured.
16.4 CONFIGURING THE SOFTwARE CON-
SOLE
Connect the supplied RS232 cable (part number
09/0639) between the rear of the PET Plus
machine and an unused COM port on the
computer.
Start the Software Console by clicking on
the Windows START button then selecting
NEXYGEN PLUS PET then selecting PET PLUS
SERIES CONSOLE.
Right mouse click on the software console then
select PORT SETTINGS.
Select the appropriate COM port then check that
the console shows the Temperature, Pressure
and Probe Readings.
The NEXYGEN Plus program is now ready for
use.
92 PET Plus User Manual
Advertisement
Table of Contents
