3.9 Fitting the sewing light and sewing light bracket (optional equipment)
2
1
1
6
4
3
5
Fig. 11
Fig. 12
The sewing light 2 is mounted on the arm cover 1.
– Unscrew the arm cover 1.
– Use a 4.5 mm Ø bit to drill the mounting holes 4.
– Screw the retainer piece 6 in place by using the screws 5.
– Screw the arm cover back on.
– Fix the sewing light 2 to the retainer piece 6.
– Remove the valve cap 4.
– Electrical connection (see chapter 4.5.2).
11