Model Numbers And Nameplate Checks - YASKAWA Z1000U Technical Manual

1.3 Model Numbers and Nameplate Checks

1.3 Model Numbers and Nameplate Checks
Please perform the following tasks after receiving the bypass
• Inspect the bypass for damage.
If the bypass appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate.
• If you have received the wrong model or the bypass does not function properly, contact your supplier.
If you find any irregularities in the above items, contact the shipping company, the distributor or representative you purchased
the bypass from or your Yaskawa office immediately. The bypass is thoroughly tested at the factory. Any damages or shortages
evident when the equipment is received must be reported immediately to the commercial carrier that transported the material.
Shipping damage is not covered by the Yaskawa warranty. After unpacking and inspecting for damage, verify that internal
wire connections have not come loose during shipment by spot checking wire terminations with a screwdriver or the appropriate
tool. Bypass storage must be in a clean and dry location. Maintain the factory packaging and provide covering as needed to
protect the bypass from construction site dirt, water, debris and traffic prior to and during construction.
u
Drive Nameplate
A – Rated Output Current
B – Software version
C – Address
D – Serial number
<1> The address of the head office of Yaskawa Electric Corporation (responsible for product liability) is shown on the nameplate.
26
H CIMR-ZU4U0011AUA
MODEL :
C / C : CIMR-ZU4U0011AUA
G
INPUT : AC3PH 380-500V 50/60Hz 10A
F
OUTPUT : AC3PH 0-475V 0-400Hz 11A
MASS : 20 kg
E
O / N : 6W3050-2-100
S / N : J0065F575310100
D
FILE NO : E131457
YASKAWA ELECTRIC CORPORATION
2-1 Kurosaki-shiroishi, Yahatanishi-Ku, Kitakyushu 806-0004 Japan
<1>
Figure 1.1 Drive Nameplate Information Example
YASKAWA SIEP YAIZ1D 01C Z1000U HVAC MATRIX Drive Bypass Technical Manual
A
REV : A
IND.CONT.EQ.
7J48
PRG : 6110
B
IP00
PASS
MADE IN JAPAN
C
E – Lot number
F – Output specifications
G – Input specifications
H – AC drive model
Refer to Figure 1.2 for details.