YASKAWA Z1000U Technical Manual page 262

7.5 Drive Cooling Fans
4.
Guide the cables through the second set of provided hooks to hold the cables in place.
A – Cooling fan A
B – Bend 3 times
5.
Thread the 4 fan unit screws into the proper holes approximately 2/3 of the way. Leave enough space to reinsert the
fan guard.
A –Screw locations
6.
Insert the fan guard and firmly tighten the screws so they do not come loose.
262
Figure 7.18 Install the Cooling Fan Unit
B
A
Figure 7.19 Cooling Fan Wire Routing
Figure 7.20 Insert Cooling Fan Screws
YASKAWA SIEP YAIZ1D 01C Z1000U HVAC MATRIX Drive Bypass Technical Manual
D
C
C – Cooling fan B
D – Bend 2 times
A