YASKAWA Z1000U Technical Manual page 136

5.7 H: Terminal Functions
Setting
16 Frequency Detection 4
17 Torque Detection 1 (N.C.)
1A During Reverse
1B During Baseblock 2 (N.C.)
1E Restart Enabled
20 Drive Overheat Pre-Alarm (oH)
2F Maintenance Period
37 During Run 2
38 Drive Enable
Setting 0: During Run
The output closes when the drive is outputting a voltage.
Status
Open Drive is stopped.
Closed A Run command is input or the drive is in deceleration or DC injection.
Setting 1: Zero Speed
The output closes when the output frequency or motor speed falls below the minimum output frequency set to E1-09 or b2-01.
Status
Open Output frequency is above the minimum output frequency set to E1-09 or b2-01
Closed Output frequency is less than the minimum output frequency set to E1-09 or b2-01
Setting 2: Speed Agree 1 (f
The output closes when the actual output frequency or motor speed is within the Speed Agree Width (L4-02) of the current
frequency reference regardless of the direction.
Status
Open Output frequency or motor speed does not match the frequency reference while the drive is running.
Closed Output frequency or motor speed is within the range of frequency reference ±L4-02.
Note: Detection works in forward and reverse.
136
Function
OFF ON
Run command
Baseblock OFF
command
Output
frequency
OFF ON
During Run
Figure 5.20 During Run Time Chart
Output frequency
OFF
Zero Speed
Figure 5.21 Zero-Speed Time Chart
/f Agree 1)
ref out
Page Setting
140 39 Energy Pulse Output
139 3A Regenerated Power Pulse Output
141 3D During Speed Search
141 4C During Fast Stop
141 4D oH Pre-Alarm Time Limit
141 60 Internal Cooling Fan Alarm
141 64 During Commercial Power Operation
141 100 to 164 Functions 0 to 64 with Inverse Output
142
Description
ON
Description
E1-09 (Min. Output Frequency) or
b2-01 (Zero Speed Level)
ON
Description
YASKAWA SIEP YAIZ1D 01C Z1000U HVAC MATRIX Drive Bypass Technical Manual
Function Page
142
142
142
142
142
142
142
142