YASKAWA Z1000U Technical Manual page 195

Setting 0: User-Defined (Static IP)
Setting 1: BOOTP
Setting 2: DHCP
n Z4-14: Duplex Mode Setting
No.
Z4-14
Setting 0: Forced Half Duplex
Setting 1: Auto Negotiate Duplex Mode and Communication Speed
This setting also auto-negotiates Z4-15, Speed Mode Setting.
Setting 2: Forced Full Duplex
n
Z4-15: Speed Mode Setting
No.
Z4-15
Setting 10: 10 Mbps
Setting 100: 100 Mbps
n Z4-16: Timeout
Sets the Control Connection Timeout value for detection of communication loss in tenths of a second. A value of 0 disables
the connection timeout.
Example: An entered value of 100 represents 10.0 seconds.
No.
Z4-16
n Z4-17 to Z4-22: Scaling Factors
These parameters define scaling factors for drive monitors in the ODVA AC/DC Drive Object (Class 2AH), Instance 1, and
the attribute given below:
Speed Scale is attribute 22
Current Scale is attribute 23
Torque Scale is attribute 24
Power Scale is attribute 26
Voltage Scale is attribute 27
Time Scale is attribute 28.
No.
Z4-17
Z4-18
Z4-19
Z4-20
Z4-21
Z4-22
n
Z4-23 to Z4-32: Dynamic Output Assembly Parameters
Parameters used in Output Assembly 116. Each parameter contains a MEMOBUS/Modbus address. The value received for
Output Assembly 116 will be written to this corresponding MEMOBUS/Modbus address. A MEMOBUS/Modbus address
value of 0 means that the value received for Output Assembly 116 will not be written to any MEMOBUS/Modbus register.
No.
Z4-23
Z4-24
Z4-25
YASKAWA SIEP YAIZ1D 01C Z1000U HVAC MATRIX Drive Bypass Technical Manual
Name
Duplex Mode Setting
Name
Speed Mode Setting
Name
Timeout
Parameter Name
Speed Scaling
Current Scaling
Torque Scaling
Power Scaling
Voltage Scaling
Time Scaling
Parameter Name
DOA116 1
DOA116 2
DOA116 3
5.14 Z: Bypass Parameters
Setting Range
0 to 2
Setting Range
10, 100
Setting Range
0 to 300 s
Setting Range
-15 to 15
Setting Range
0 to FFFFH
0 to FFFFH
0 to FFFFH
Default
1
Default
10
Default
0 s
5
Default
0
0
0
0
0
0
Default
0
0
0
195